Panasonic AG-HDP24E Operating Instructions Manual Download

Page: 45 / 98

Screen Display: Deck Information (DIAG) Icons

S
c

en Di

Audio level meter display

Indicates input level during recording or recording standby

and audio level of played clip during playback.

Indicates value of set monitor volume in the upper rows (4

and 5) of the audio level meter when the AUDIO MON +/-

buttons are pressed.

USB HOST indicator

Displays “HOST” when the USB HOST connector is

enabled (and external input connectors are disabled).

Battery status indicator

Displays the following icons to indicate remaining battery

charge.

➝

◆

NOTE:

• The last two icons flash when displayed.

• When the AC adaptor is being used, an icon other than

may appear; this is not a sign of malfunctioning.

Master side/slave side indicator

Indicates master side/slave side status in 3D REC/PB

mode/SYNC PB mode.

10)

System format indicator

Indicates system format of setting menus during recording

or recording standby.

Indicates the system format of the played clip during

playback.

11)

System frequency indicator

Indicates the system frequency.

12)

REMOTE, REF ERROR, TEXT MEMO indicator

Displays the “REMOTE” icon in REMOTE status. “REF

ERROR” appears when the REF IN connector signal differs

from the system frequency or is not synchronized with SDI

input signals, or in other situations when synchronization

with the reference signal is not possible. This parameter

also appears when the SETUP - DISPLAY - OSD GRADE

menu setting is set to MODE&TC.

Also when the SETUP - DISPLAY - OSD TC SELECT menu

setting is set to something other than T&S&M, messages

notifying TEXT MEMO and MARKER attachment are output

(these messages are provided temporary priority also when

the REMOTE icon is on).

◆

NOTE:

• The unit will not operate normally when “REF ERROR” is

displayed. Check connections and input signals.

This menu shows deck information. Deck information includes

USER button, video, audio and warning information.

Press the DIAG button.

Indicates information on set user button values.

Once displayed, it will open the previously displayed page

when pressed next time.

◆

NOTE:

• This information is not displayed when a menu is open.

• Use the SETUP - DISPLAY - OSD OUTPUT menu setting

to switch destination of displayed output.

• Playback and other operations are not available during

DIAG display.

Press the Left/Right cursor buttons.

The information displayed changes with each press of the

button.

Information displayed

USER BUTTON:

Indicates the functions assigned to the USER buttons 1

- 6 and currently set values.

VIDEO:

• Format of input and output signals or absence of them

• System compression format

• Presence or absence of reference signals

and other information is displayed.

◆

NOTE:

• In 3D REC/PB and SYNC PB modes, “GENLOCK”

indicates slave side status.

Deck Information (DIAG) Icons

1,3

Summary of Contents for AG-HDP24E



































































































Search results

Summary of Contents for AG-HDP24E

Reviews:

Related manuals for AG-HDP24E

Brands by name

Popular brands

Panasonic AG-HDP24E, Operating Instructions Manual

Search results

Summary of Contents for AG-HDP24E

Reviews:

Related manuals for AG-HDP24E

Brands by name

Popular brands