E-6
Parts and their functions
(Continued)
32.FILTER INDICATOR
This lights when the filter position is shown on the 30.
Number display LED.
33.GAIN INDICATOR
This lights when the gain value is shown on the 30.
Number display LED.
34.SHUTTER INDICATOR
This is lit when the shutter is displayed on the 30.
Number display LED.
35.SHUTTER SPEED INDICATOR
When displaying the shutter in 30. Number display
LED, the displayed format can be distinguished with
the ON/OFF.
ON:
Shutter speed is displayed. The
¢¢¢¢
part of
the shutter speed value 1/
¢¢¢¢
is displayed
in the 30. Number display LED.
OFF:
Shutter angle is displayed.
Connector area
1. CAM/BS connector
This is used to connect the unit with the camera
recorder or basestation (AJ-BS300, option).
2. VIDEO OUT connector
Video signal output from the camera recorder is output
without modification.
Rear Side
1. Frequency charateristic adjustment knob
This is used to adjust the frequency characteristic of
the video signal.
2. Level adjustment knob
This will adjust the level of the video signal.
<Note>
When performing adjustment with the above knobs,
remove the rear cover, and adjust by inserting a small
screwdriver etc.
Menu displays for VIDEO OUT output
Settings menu is displayed in the VIDEO OUT terminal when the MENU switch is set to ON, and CHARACTER button is
turned ON.
This menu screen is characters superimposed on the composite signal of the camera recorder.
1
2
Pin No.
Signal
1
CAM DATA (H)
2
CAM DATA (C)
3
CAM CONT (H)
4
CAM CONT (L)
5
ECU_ON
6
Video input
7
GND (Video)
8
Standby
9
+12 V (IN)
10
GND
CAM/BS
VIDEO OUT
1
2
AG-EC4G(VQT2H46).book 6 ページ 2009年6月22日 月曜日 午前11時20分