Panasonic AG-DVX200AN Operating Instructions Manual Download

Page: 87 / 203

- 87 -

≥

Register “WFM” to a USER button. (

)

This function displays waveforms on the LCD monitor.

Press USER button in the recording screen.

≥

When [WFM TYPE] is set to [WAVE] or [VECTOR], each press of the button enables/disables
WFM.

≥

When [WFM TYPE] is set to [WAVE/VECTOR], each press of the button switches the setting.
WAVE (wave display)

VECTOR (vector display)

OFF

≥

If you have enabled WFM by touching the applicable USER button icon, set [WFM] to [OFF] to
disable it.

≥

This function is not available in the following cases:

When using the viewfinder

When recording yourself (

)

When using Focus Assist (

)

During Freeze Frame (

)

When color bars are displayed. (

)

≥

[WFM] will be canceled in the following cases:

If you turn the unit off

If you press the THUMBNAIL button

When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (

122

)

∫

To change the type of

WFM

Select the menu.

≥

This function is not available in the following cases:

When using Focus Assist (

)

During Freeze Frame (

)

When color bars are displayed (

)

∫

To change the display position of

WFM

Select the menu.

≥

You can also change the waveform position to the upper left, upper right, bottom left or bottom
right by performing one of the following operations while a waveform is displayed:

Rotating the jog dial

Sliding the waveform while touching it.

WFM

: [SW SETUP]

[WFM TYPE]

desired setting

[WAVE]:

Displays waveforms as waves.

[VECTOR]:

Displays waveforms as vectors.

[WAVE/VECTOR]:

Switches the setting each time the applicable USER button is pressed.

: [SW SETUP]

[WFM POSITION]

desired setting

[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands