- 48 -
Push AF
If you press and hold the PUSH AUTO button, Manual Focus will be temporarily switched to Auto
Focus.
≥
Set this unit to Manual Focus. (
)
Press and hold the PUSH AUTO button.
≥
The focus position will be automatically adjusted for the subject at the center of the screen.
≥
If you set [AREA MODE] to [FOCUS], [FOCUS/IRIS] or [FOCUS/Y GET] and use Area Mode, the
focus position will be automatically adjusted to the subject you have touched. (
)
≥
It will be canceled when the button is released, and the focus position set by the Push AF will be
maintained.
≥
Push AF does not work in following cases:
j
When Auto Focus is used
j
When a remote control (commercially-available) is connected (
)
Focus Assist
Pressing the FOCUS ASSIST button allows you to use Focus Assist.
Select the menu.
≥
You can also use Focus Assist by registering [FOCUS ASSIST] to a USER button. (
)
Selecting a Focus Assist method
: [SW SETUP]
#
[FOCUS ASSIST]
#
desired setting
[EXPAND]:
Magnifies the central area of the screen when Focus Assist is used.
[PEAKING]:
Highlights in-focus portions with color when Focus Assist is used.
[BOTH]:
Sets both [EXPAND] and [PEAKING].
Using Focus Assist
≥
Switch to Manual Focus Mode. (
)
Press the FOCUS ASSIST button.
≥
To turn off Focus Assist, perform the following operations:
j
Press the FOCUS ASSIST button again.
j
Touch [EXIT].
MENU
FOCUS
ASSIST