Panasonic AG-DVX200AN Operating Instructions Manual Download Page 168

Page: 168 / 203

- 168 -

This enables/disables a function that controls recording performed with an external device
connected to the SDI OUT terminal.

≥

When [HDMI TC OUTPUT] is set to [ON], you can also control an HDMI device. (

170

)

≥

It is not possible to control recording performed with an external device connected to the
SDI OUT terminal in the following cases:

When [REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i] (

142

)

When [RESOLUTION] is set to [DOWN CONV.] (

115

)

When [ON] is selected, you can control recording performed with this unit and an external device
using the recording start/stop button.

When [ON] is selected, EDH is superimposed on images of SD signals (480i and 576i) output from
the SDI OUT terminal.

≥

(In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode.
(

101

)

This adjusts the gain value of audio signals output from the SDI OUT terminal.

≥

Set [OUTPUT SEL] to [SDI] or [SDI+AV].

(

115

)

≥

(In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode.
(

101

)

[SDI REMOTE]

[ON]/[OFF]

[REMOTE REC LINK]

[ON]:

Controls recording performed with this unit and an external device using the
recording start/stop button.

[OFF]:

Controls recording performed with an external device using the USER button
function [AUTO REC]. (

)

[SDI EDH]

[ON]/[OFF]

[SDI AUDIO GAIN CHG]

[0 dB]/[-6 dB]/[-12 dB]

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands