24
4.5 DISPLAY SETUP Screen
Zebra Detect 1
The Zebra Detect function is basically a built in light meter that meas-
ures the peak value of white. A black and white striped diagonal pattern indicator, which is
superimposed on the picture and only appears in the LCD viewfinder, in portions of the
video image corresponding to the pre-set brightness level. This level is set between 80%
to 100% and will warn you when the video signal has reached the predetermined level.
There are two warning patterns used in the DVX-100, normally, Zebra Dectect1 is set to
80% and Zebra Detect 2 is set to 100%. Zebra Detect 1 Is indicated by diagonal strips
that start right top and Zebra Detect 2 is indicated by diagonal strips that start at the left
top. Remember, you must press the Zebra button to activate the Zebra function, each
time the ZEBRA button is pressed you will cycle from OFF to Zebra 1 to Zebra 2 to Marker
to OFF . Use these indications as a guide when you use the manual iris control in manual
mode to lower the brightness if whites are to high.
Zebra Detect 2
The Zebra Detect function is basically a built in light meter that meas-
ures the peak value of white. A black and white striped pattern only appears in the LCD
viewfinder or EVF, in portions of the video image corresponding to a pre-set brightness
level. This level is set here for 80% to 100%. Zebra Detect 2 is normally, set to 100%.
Remember you must press the Zebra button to activate the Zebra function.
Item
Settings
Default
ZEBRA DETECT 1 80%, 85%, 90%, 95%, 100%
80%
ZEBRA DETECT 2 80%, 85%, 90%, 95%, 100%
100%
MARKER
ON / OFF
ON
VIDEO OUT OSD
ON / OFF
OFF
DATE / TIME
OFF, TIME, DATE, TIME&DATE
OFF
LEVEL METER
ON / OFF
ON
ZOOM-FOCUS
ON / OFF
ON
TAPE-BATTERY
ON / OFF
ON
OTHER DISPLAY
OFF, PARTIAL, ALL
PARITIAL
LCD BACKLIGHT
HI / NORMAL
NORMAL
LCD / EVF SET
LCD BRIGHTNESS, LCD COLOR
LEVEL, EVF BRIGHTNESS
YES
SELF SHOOT
NORMAL / MIRROR
MIRROR
EVF MODE
ON / AUTO
ON
