manualshive.com logo in svg

Panasonic AG-CPD20P, Operating Instructions Manual

Share
Download
Panasonic AG-CPD20P Operating Instructions Manual Download Page 70

70

71

Playback 

(continued)

<Detailed Overlay OSD>

<Simple Overlay OSD>

  

Speed (MPH / km/h)

 

OWN :

 Own vehicle speed

 

TGT   :

 Target vehicle speed

 

Location information (latitude)

 

Location information (longitude)

 

Playback filename

  (Local time at start of recording)

   “NO FILE” appears when there is no file to play back.

 

Mode indication

 

 : Playback

 

  : Pause

 

 : Fast forward

 

 : Rewind

 

 : Slow

 

Playback speed and status indication

  <Speed>

  x1/10, x1/, x4, x0, x00

   

<Status Display>

 (see “Status Display” on page 118)

  READ ERROR, UNSUPPORTED, 

  PLAY ERROR

 

Playback location (in file units)

  

Date/Time 

  

Trigger signal (GPI1-16) input status

   (GPI1 to 16 are displayed in order from the left.)

   The  characters  assigned  by  [Display]  appear  when  the 

state set by [Detection] occurs.

  

Mark position

     : File beginning

     : Trigger position

     : Bookmark position

  

Sound output setting

 

  ( : appears only during playback)

 

A1, 2, 3, or 4 :

 Audio1, , , or 4 is output.

Playback with the remote control panel is not available at 

present. Upgrading is scheduled for the future. 

For playback, it is recommended to use the Front-End 

application or Back-End Client application.

Summary of Contents for AG-CPD20P








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands