114
115
No.
Message
Measure
E1576
Write Protect Card found on slot1.
Record cannot be started.
The write-protection switch on the SDHC Memory Card is set to the “LOCK”
position. Slide the write-protection switch away from the “LOCK” position.
E15764
Write Protect Card found on slot.
Record cannot be started.
E15765
Write Protect Card found on slot.
Record cannot be started.
E15766
Write Protect Card found on slot4.
Record cannot be started.
E15767
No SDHC Cards found.
Record cannot be started.
No SDHC Memory Card is inserted. Insert an SDHC Memory Card.
E15768
Write Error.
Record cannot be started.
The SDHC Memory Card cannot be written to. Replace the SDHC Memory
Card.
E15769
Card Full.
Record cannot be started.
The following conditions may have occurred.
• There is no space left on the SDHC Memory Card.
• Files contained in one of the SDHC Memory Cards inserted in the SDHC
Memory Card slots 1, 2, 3, and 4 exceed 5,000 files.
Replace the SDHC Memory Card with an SDHC Memory Card with free
capacity, or free up space in the SDHC Memory Card for new data. (free
space of more than 10 MB)
E0801
Recorder reboots by
unrecoverable card ejection error.
Be sure to use the correct procedure to remove and load SDHC Memory
Cards.
E080
Please reinsert the card or reboot
the system.
Check the SDHC Memory Card and re-insert it, or reboot the recorder.
E0901
Firmware Update FAILED!
An error occurred during the update.
• Check whether the update file for the recorder has been correctly copied
to the SDHC Memory Card or USB memory device.
• Reformat the SDHC Memory Card or USB memory device before use.
• Use another USB memory device.
• Check whether there are multiple update files on the SDHC Memory Card
or USB memory device.
• Check whether there are multiple SDHC Memory Cards and/or USB
memory devices containing update files.
• An SDHC Memory Card with a \DATA folder cannot be used for updating.
• A USB memory device containing a folder other than the \WIDKEY folder
cannot be used for updating.
E0911
Microcontroller Update FAILED!
An error occurred during the update.
The recorder reboots automatically to restart an update.
Contact your supplier if the problem persists.
E091
Unsupported Microcontroller
Detected!
The recorder has broken down.
Contact your supplier.
E091
AG-RCP0 Update FAILED!
An error occurred during an update of an AG-RCP0 connected to the
recorder.
The recorder reboots automatically to restart an update.
Contact your supplier if the problem persists.
E09
Unsupported Control Panel
Detected!
A Remote Control Panel not supported by the recorder was detected.
Disconnect the Remote Control Panel.
E40
Officer’s information file cannot be
loaded.
The officer data file (WID
*****
.TXT) is corrupted. Create a new officer’s data file,
save it to a USB memory device and re-register it.
E41
Since you are not an
administrator, you cannot open
this menu.
You are not registered as an administrator and cannot open this menu. Ask a
registered administrator for assistance.
E4
Officer’s information file cannot be
loaded.
There is no Officer Registration file or it contains the wrong data. Create a
correct Officer Registration file (WOFFICER.TXT), copy it to a USB memory
device and reload it.
E4
Admin’s information file cannot be
loaded.
There is no Administrator Registration file or it contains the wrong data. Create
a correct Administrator Registration file (WADMIN.TXT), copy it to a USB
memory device and reload it.
E45
Classification list cannot be
loaded.
There is no classify file or the content of the file is incorrect. Copy the
correct classify file (CLASSIFY.TXT) to the USB memory device and
reregister it.
Error Message
(continued)
