3-7
Suitable screwdriver
When tightening the terminals of the terminal block, use a screwdriver (Phoenix Contact Co. Product
No.1205037) with a blade size of 0.4 X 2.5 (Model No. SZS 0.4 X 2.5)
The tightening torque should be 0.22Nm to 0.25 Nm (2.3 kgfcm to 2.5 kgfcm)
Model No.
Manufacturer
Parts No.
Product No.
Order product No.
Phoenix Contact Co. SZS0.4 X 2.5
1205037
AFP0806
Wiring
1. Remove a portion of the wire’s insulation.
2. Insert the wire into the terminal block until it contacts the back of the terminal block. Then, tighten the
screw clockwise to fix the wire in place.
Notes
-When removing the wire’s insulation, be careful not to scratch the core wire.
-Do not twist the wires to connect them.
-Do not solder the wires to connect them. The solder may break due to vibration.
-After wiring, make sure stress is not applied to the wire.
-In the terminal block socket construction, if the wire closes upon counter-clockwise rotation, the
connection is faulty. Disconnect the wire, check the terminal hole, and then re-connect the wire.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Summary of Contents for AFPE224300
