Panasonic AF-FX100, Setup Instructions

Page: 65 / 69

64 65
Variable name Message Settings Description
5 CameraFrameRate Camera frame rate
setting
(frame per sec-
ond).
"0" use camera default
frame rate
Fixed The number of Input images from
a camera is specified. "10" fixed
for all libraries.
Setting value: 10 fps
* Set to 10 fps (sheets/sec.) at
the camera side.
6 CameraResolution Camera resolution
setting
values defined in
CGI spec sheet(typically,
horizontal pixels).
"0" use default
camera
image resolu-
tion
Fixed The resolution of input images
from a camera is specified. "0"
fixed for all libraries.
Setting value: 0
* Specify the value at the camera
side (VGA).
7 KanshiServerCameraAddr ip_address of kanshi_
server camera netwark
Mandatory The IP addresses of PCs on
which the PC software package
is installed are specified.
E.g.: 192.168.10.30
8 OriginalAlarmIpAddr original alarm notification
PC ip_address*(MAX:8) Optional Up to 8 IP addresses of
DG-ND400 or PCs on which
DG-ASM100 is installed can be
registered. *
1
Unless otherwise specified, leave
this blank.
When an alarm is detected, noti-
fication is performed.
E.g. 1: 192.168.10.31
E.g. 2
：
192.168.10.32
9 OriginalAlarmPort original alarm notification
PC port Fixed This is the port number for send-
ing "original alarm". The default
is "1818".
Setting value: 1818
10 TokuIpAddr IP address of face recog-
nition pc Fixed Unused.
11 BoxServerCameraPort port of box_server cam-
era network Fixed This is the port number of the
server at the BOX side to com-
municate with the PC software
package. "10000" fixed.
Setting value: 10000
12 KanshiServerCameraPort port of kanshi_server
camera network Fixed This is the port number of the
server at the PC software pack-
age side to communicate with
the BOX. "15000" fixed.
Setting value: 15000