Operation manual for Narrow-pitch connectors A35UH
Panasonic Corporation
industrial.panasonic.com/ac/e/
©
Panasonic Corporation 2017
ACCTF32E 201704
- 6 -
02-2. Precautions for board design
1) Circuit design
(1)When designing the terminal foot pattern, check the latest specifications and
examine the recommended foot pattern and dimensions of the metal mask opening.
The current recommendations are indicated on pages 13 and 14.
(2)This connector is provided with power terminal for high current.
When designing, in order to prevent an excessive temperature rise, make sure to
design a foot pattern for the power terminal.
(3)
Pay attention to the following points when providing a through hole by
extending the foot pattern.
If a through-hole is created simply by extending the foot pattern by the same
width, solder is absorbed into the through-hole during the reflow process, which
may cause defective or poor soldering of the terminals.
①
Thin and extend the tip of the foot
pattern before creating a through-hole.
②
Prevent solder from reaching the land
by using a coverlay or resist.
Power terminal
Power terminal
Socket
Header
In general, 1/3 the
terminal pattern
width.
NG
Good
Good
Summary of Contents for A35UH
Page 30: ...ACCTF32E 201704 2017 ...
