Network Dome Camera
Quick Operation Guide
Installation
Before you start:
Please make sure that the device in the package is in good condition and all
the assembly parts are included.
Make sure that all the related equipment is power-off during the installation.
Check the specification of the products for the installation environment.
Make sure the power supply is matched with your required voltage to avoid
damage.
If the product does not function properly, please contact your dealer or the
nearest service center. Do not disassemble the camera for repair or
maintenance by yourself.
Please make sure that the wall is strong enough to withstand three times the
weight of the camera.
Steps:
Drill the cable hole and the screw holes in the ceiling according to the
supplied drilling template.
Screw Hole
Screw Hole
Screw Hole
Ceiling Mounting
Figure 2-1 Drilling Template
10
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
