Panasonic 403171 Operating Instructions Manual Download Page 148

Page: 148 / 161

PROBLEM SOLVING

146

(see Note 1)

501/502 Communication error occurred using the internal V.34

Modem.

Check with the other party.

540/541

542

543/544

Communication error occurred while transmitting.

1. Reload the document(s) and send again.
2. Check with the other party.

550

Telephone line disconnected.

Check with the other party.

552/553
554/555

Communication error occurred while receiving.

Check with the other party.

580

Sub-Address transmission to a unit that has no Sub-
Address function.

Check the remote station.

124

581

Sub-Address Password transmission to a unit that has
no Password Sub-Address function.

Check the remote station.

124

630

Redial was not successful due to a busy line.

Reload the document(s) and send again.

631

During dialling, STOP was pressed.

Reload the document(s) and send again.

634

Redial was not successful due to no response from the
called station or wrong number dialed.

Note: If busy tone was not detected, the machine will

only redial once.

Check the telephone number and send again.

638

Power failure occurred during the communication.

Check the power cord and plug.

870

Memory overflow occurred while storing document(s)
into memory for transmission.

1. Transmit document(s) without storing into

memory.

2. Install Optional Memory Card.

NOTE

1. After identifying the problem and verifying the recommended action, if the Information Codes keep reoccurring or

for help on Information Codes that appear on your machine but are not listed above, please contact your local
Authorized Panasonic Dealer.
(For mechanical failures, see the Troubleshooting section in the Operating Instructions (For Copier)

Info.

Code

Meaning

Action

Page

Troubleshooting

Summary of Contents for 403171


































































































































































Search results

Summary of Contents for 403171

Reviews:

Brands by name

Popular brands

Panasonic 403171, Operating Instructions Manual

Search results

Summary of Contents for 403171

Reviews:

Brands by name

Popular brands