Base unit
1
M
CID
N
2
Press
MCN
to search from the most recent call,
or
MDN
to search from the oldest call.
3
To call back, press the desired cellular line key
(
M
CELL 1
N
to
M
CELL 4
N
).
To exit, press
M
EXIT
N
.
n
Using the landline
Handset / Base unit
1
Proceed with the operation for your unit.
Handset:
MCN
CID
Base unit:
M
CID
N
2
Press
MCN
to search from the most recent call,
or
MDN
to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press
M
N
.
– To exit, press
M
OFF
N
.
Base unit:
– To call back, press
MZN
.
– To exit, press
M
EXIT
N
.
Note for handset and base unit:
R
If the entry has already been viewed or
answered, “ ” is displayed, even if it was
viewed or answered using another unit.
R
to indicates the caller information was
received from the cellular line.
R
and indicates the caller information was
received from the landline.
R
In step 3, the unit automatically uses the line
you set in line selection mode (page 17) to call
back. When the line selection mode is set to
“
Auto
”
, the indicated line ( or ) is used for
the call. If the indicated line is already being
used or you want to select the other line:
Handset:
Press
M
L1
N
or
M
L2
N
.
Base unit:
Press
M
LINE 1
N
or
M
LINE 2
N
.
Editing a caller’s phone number
You can edit a phone number in the caller list by
removing its area code and/or the long distance
code “1”.
Handset
1
MCN
CID
2
MbN
: Select the desired entry.
3
M
MENU
N
a
MbN
:
“
Edit
”
a
M
SELECT
N
4
Press
M
EDIT
N
repeatedly until the phone
number is shown in the desired format.
5
Using a cellular line:
To make a cellular call, continue from step 3,
“Viewing the caller list and calling back”,
page 47.
Using the landline:
Press
M
N
.
Base unit
1
M
CID
N
2
MbN
: Select the desired entry.
3
Press
M
EDIT
N
repeatedly until the phone
number is shown in the desired format.
4
Using a cellular line:
To make a cellular call, continue from step 3,
“Viewing the caller list and calling back”,
page 47.
Using the landline:
Press
MZN
.
Note for handset and base unit:
R
In step 5 on the handset or step 4 on the base
unit, the unit automatically uses the line you set
in line selection mode (page 17) to call back.
When the line selection mode is set to
“
Auto
”
,
the indicated line ( or ) is used for the call.
If the indicated line is already being used or you
want to select the other line:
Handset:
Press
M
L1
N
or
M
L2
N
.
Base unit:
Press
M
LINE 1
N
or
M
LINE 2
N
.
Caller ID number auto edit feature
Handset / Base unit
Once you call back an edited number, the unit
which was used to call back remembers the area
code and format of the edited number. The next
time someone calls from the same area code,
caller information is customized by the unit as
follows:
– When the call is being received, the Caller ID
number is displayed in the same format as the
edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as the
edited number, when reviewed from the caller
list.
For example, you can use this feature to set the
unit to ignore the area code of callers in your area,
so that you can call these local numbers using
caller information without dialing the area code.
48
For assistance, please visit http://shop.panasonic.com/support
Caller ID Service
KX-TG954x_955x_OI(en)_0507_ver432.pdf 48
2018/05/07 14:00:44
