The description below is the configuration of the priority stream that can transmit images without deteriorating
the image quality and refresh interval even when multiple users access concurrently.
Priority stream
[Activation]
Select “On” or “Off” to determine whether or not to use the priority stream.
•
Default:
Off
Note
•
When “On” is selected for “Activation” of “Priority stream”, number of users who can access the camera
may be limited.
[Destination IP address(1)]
Enter the first destination IP address.
•
Default:
None (blank)
[Destination IP address(2)]
Enter the second destination IP address.
•
Default:
None (blank)
[Stream type]
Select either “JPEG”, “H.264/MPEG-4(1)” or “H.264/MPEG-4(2)”.
•
JPEG:
JPEG images will be transmitted.
•
H.264/MPEG-4(1):
H.264(1) (or MPEG-4(1)) images will be transmitted.
•
H.264/MPEG-4(2):
H.264(2) (or MPEG-4(2)) images will be transmitted.
•
Default:
JPEG
Note
•
When “Best effort” is selected for “Transmission priority” of “H.264 (MPEG-4)”, bit rate will vary between
the maximum and minimum rates while images are being transmitted.
SW355
SW352
SF346
SF342
SF335
SW316L
SW316
SP306
SP305
SP302
SW155
SW152
NP502
:
•
When “H.264” is selected for “Recording format”, it is impossible to transmit H.264(2) images. In this
case, “H.264/MPEG-4(2)” is invalidated.
NP502
:
•
“JPEG” is available only when a 1.3 mega pixel setting is selected for “Picture (Camera) mode”.
156
Operating Instructions
15 Configure the settings relating to the authentication [User mng.]
