ATH2 Owner’s Manual
2
Motorized Lens Sled Parts
During installation, this manual will refer to the motor side, or the pulley side of the mechanism. Refer to
the picture below for a description. As shipped from the factory the “lens-in” side of the unit is at the motor
end. Depending on the projector, “Lens in” will either be on the motor or the pulley side of the sled. See
Chapter 6 – Setup, to configure the “lens in” orientation of the sled to the pulley side.
Mounting bar
Motor side
Pulley side
Optical
sensors
Lens adaptor plate
©
Panamorph Inc January 2009 – All rights reserved
Page
4
