Panametrics T17, Installation Manual, Page: 33 / 76

Model T17 Installation Guide 21
Chapter 2. Installing Pipe Nozzles
2.3.2 Selecting and Marking the First Nozzle Location, Non-Diametrical, Mid-Radius (cont.)
5. Using the calculated dimension AS/2 in 4, center punch the pipe to mark the position for the center of the first
nozzle.
Pipe
AS/2 Dimensions NPS (DN) O.D.
26 in. (650mm) 26 in. 13.829 in. (351.26 mm)
28 in. (700mm) 28 in. 14.876 in. (377.86 mm)
30 in. (750mm) 30 in. 15.924 in. (404.46 mm)
32 in. (650mm) 32 in. 16.971 in. (431.06 mm)
34 in. 34 in. 18.018 in. (457.66 mm)
36 in. (900mm) 36 in. 19.065 in. (484.26 mm)
38 in. 38 in. 20.113 in. (510.86 mm)
40 in. (1000mm) 40 in. 21.160 in. (537.46 mm)
42 in. (1050mm) 42 in. 22.207 in. (564.06 mm)
44 in. (1100mm) 44 in. 23.254 in. (590.66 mm)
46 in. 46 in. 24.301 in. (617.26 mm)
48 in. (1200mm) 48 in. 25.349 in. (643.86 mm)
52 in. (1300mm) 52 in. 27.443 in. (697.06 mm)
54 in. 54 in. 28.490 in. (723.65 mm)
56 in. (1400mm) 56 in. 29.538 in. (750.25 mm)
60 in. (1500mm) 60 in. 31.632 in. (803.45 mm)
64 in. (1600mm) 64 in. 33.726 in. (856.65 mm)
66 in. 66 in. 34.774 in. (883.25 mm)
Top
Reference
Point
Center Point
of 1st Nozzle
2
AS