MB1000 SPECIFICATIONS
1690 Corporate Circle, Petaluma, CA. 94954 • 800-472-5555 • 707-283-5900
Fax 707-283-5901 • www.panamax.com
L615 REV. B 10/09
© 2009 Panamax Inc. Panamax and the Panamax logo are registered US trademarks of Panamax.
DESIGNED IN USA • MADE IN CHINA
3 Year
Product
Warranty
2 Year Battery
Warranty
C
US
LISTED
FRONT/BACK PANELS FEATURES
MB1000
WEIGHTS & MEASUREMENTS, QUANTITIES, UPC’S
FOR ORDERING & SHIPPING
SINGLE MODEL MB1000
Dimensions
Weight
L 17” x H 4” x W 13” 36 lbs.
SINGLE UNIT CARTON
Dimensions
Weight UPC
L 22.25 x H 9.25” x W 17.5” 40 lbs. 050616-008518
MODEL:
MB1000
MB1000 prevents critical equipment from losing setup configuration,
stored data and hard-disk crashes. Shuts off projection equipment
via IR control to allow the projector bulbs to go through a proper
cool-down cycle before shutting off.
UPS Output
Voltage
120 ± 5 V Simulated Sine Wave
Frequency 60 Hz ± 1%
UPS Output Capacity 1000VA 600W @ 0.6pf
UPS Backup Time 3 minutes at full load
Transfer Time
< 10ms
Specifications subject to change due to product upgrades and improvements..
AC Power
Current Rating
12 A
Surge Protection
900 Joules
Overvoltage Shutoff, fast rise
150 ± 5 V
Overvoltage Shutoff, slow rise
132 ± 5 V
Undervoltage Shutoff
90 ± 5 V
Automatic Voltage Regulation,
Sensitive Mode Capture Range
98 – 135 V
Automatic Voltage Regulation,
Sensitive Mode Output Range
120 ± 5%
Automatic Voltage Regulation,
Standard Mode Capture Range
93 – 145 V
Automatic Voltage Regulation,
Standard Mode Output Range
120 ± 10%
Filtration
40dB min from 100kHz-2MHz
65dB max @ 270kHz
Input
Voltage
85 – 137 Vac
Frequency
57 – 63 Hz
Power Switch
Press and hold the
power button for 2
seconds to turn the
UPS ON or OFF.
IR Detector
IR Detector, for
sampling IR remote
control signals.
Menu Navigation Knob
Rotate clockwise to navigate to the
next screen, counter-clockwise to
return to the previous screen, push
to select menu item.
Status Display
LCD displays status
and menu
navigation items.
Removable Battery
Access Panel
Easy to remove for
battery access and
replacement.
Outlet Bank 1
Indicator
Illuminated blue
when outlet bank 1
is switched on.
Outlet Bank 2
Indicator
Illuminated blue
when outlet bank 2
is switched on.
Line Fault Indicator
This LED will illuminate in red to warn the user that a wiring
problem such as a bad/missing ground or reversed wiring exists
within the AC receptacle. If illuminated, disconnect all equipment
and contact an electrician to insure outlet is properly wired.
10 Ft. AC Power Cord
USB to Computer
Outlet Bank 2 - Non-Critical-Load Outlets
Four battery powered, surge protected and AVR outlets
for connected equipment insures temporary uninter-
rupted operation of connected equipment during a power
failure. These outlets will shut off when the batteries
drain to a designated level to reserve remaining battery
charge from the critical load outlets.
Outlet Bank 1 - Critical Load Outlets
Four battery powered, surge protected
and AVR outlets for critical-load
equipment insures temporary
uninterrupted operation of connected
equipment during a power failure.
IR Control Section
Indicator LED’s –
Indicates status IR
Output Jacks – Standard
1/8” (3.5mm) mono jack
for connection to an IR
flasher (IR flashers not
included).
RS-232 Serial Communication Port
The serial port allows connection and communication between
the UPS and an automation or computer system. This allows
the installer to program a number of variables including the
Critical Load Battery Threshold. See the software documenta-
tion for more information.
Circuit Breakers
Resettable circuit
breakers provide
optimal overload
protection.
Ground
Lug
