Panacom T47 TripSound SP-3047, User Manual

Page: 5 / 16

Pg. 5
Remote Control Instruction:
1. POWER: short press for standby function, after entering the power saving standby mode,
short press again to turn back to the current model, such as if there is no equipment, will go
to “-HI-”
2.V- : the same function as the same key on the product
3.
: the same function as the same key on the product
4. V+ : the same function as the same key on the product
5. Mode: the same function as the MODE on the product
6. V + / V- : under USB, TF card, AUX, mode, for turn down or turn up the volume
7. Number keys 0-9: in reading USB / TF card status, if you want to listen the 12th song, you
can entry the 1 and 2, wait for two seconds, it will automatically jump to play the 12th songs,
pay attention to the input device when entry the number is more than the total number of songs,
the number is invalid.
8. EQ: in reading USB/TF card status, short press is for switching five modes, NORMAL, POP,
ROCK, JAZZ ,CLASSIC mode.
9. RPT: in reading USB / TF card status, short press is for switching the four cycle mode (ALL
full circle, RAN random cycle, ONE single, Song cycle, FOLD folder cycle)
10.
: in USB, TF card, mode, AUX mode, short press to mute.
11 .100+ : Digital Select button: in MP3 mode (USB / TF card), short press to add the current
track number plus 100.
Note:
1. Do not allow water to spill onto the surface or into the product
2. unless the relevant regulatory or has been directed by a person responsible for the safety of
the products they use, otherwise the product is not available for the body weak force, or there
is a lack of sensory capabilities persons (including children).
3. This product is not intended for using by children, please supervision of children, do not let
it play with the product.
4. if the product surface is damaged or the case of mechanical or electronic equipment
malfunction, do not use this product, please contact with our service center.
5. Do not shake or up-down dumped about this product. .
6. Do not place the product immersed in water.
7. Do not place the product in light exposure to the location, to be placed in a dry and ventilated
place.
8. Do not place heavy objects on the product.
Thank you for choosing our products!