7
1.4
Remote Controller (Optional)
It uses two AAA size batteries and works after loading batteries as following:
Step1: Open the battery cover of the Remote Controller
Step2: Place batteries. Please take care the poles (+ and -)
Step3: Replace the battery cover
Notice: Frequently defect checking as following
1. Check batteries poles
2. Check the remaining charge in the batteries
3. Check IR controller sensor is mask
If it still doesn't work, Please change a new remote controller to try, or contact your dealers
The interface of remote controller is shown in Fig2.11 Remote Controller.
◆
Switch Remote Control ID
Take remote control and point to DVR then continuously press
“8”,”8”,”ID(0-65535)”,”Enter”.
*
The ID must be the same on DVR.
*
For example: If ID=1, please take remote control and point to DVR then press 8,8,1,Enter.
*
Repeat to release ID
Fig 2.11 Remote Controller
Item
Name
Function
1 Power
Button
Soft switch off to stop firmware running. Do it before
power off.
2 INFOR
Button
Get information about the DVR like firmware version,
HDD information
3
REC Button
To record manually
4
Digital Button
Input digital or choose camera
5
Multi Screen Button
To choose multi screen display mode
6
SEARCH Button
To enter search mode
7
MENU Button
To enter menu
8
ENTER Button
To confirm the choice or setup
9
Direction Button
Move cursor in setup or pan/title PTZ
10
+/- Button
To increase or decrease the value in setup
11
Playback Control Button
To control playback, Fast forward/rewind/stop/single
frame play
12
AUDIO Button
To enable audio output in live mode
13
Auto Dwell Button
To enter auto dwell mode
14
BACKUP Button
To enter backup mode
15
PTZ Control Button
To control PTZ camera:
Move camera/ZOOM/FOCUS/IRIS/SPEED control