Pan Dacom
Nets work together.
Version 1.1
SPEED-DSL 4.6
(9900-005-001-A, 9900-006-001-A)
page 3 of 14
C
AUTION
Pan Dacom Networking AG strongly recommends the use of proper electrostatic
discharge (ESD) precautions when handling this equipment.
1. Installation
1.1. Unpack and Inspect the Equipment
The following components should be included:
1 SPEED-DSL 4.6 or SPEED-DSL 4.6G
1 power supply
1.2. Power Up the SPEED-DSL 4.6
Plug the power supply into the back of the SPEED-DSL 4.6 and connect it to the power
source. Verify that the Power LED on the front of the SPEED-DSL 4.6 is illuminated.
N
OTE
Upon start up, the Ethernet link will remain disabled (as indicated by solid
illumination of the Ethernet Rx, Tx, and Lnk LEDs) until at least one of the
two SDSL connections has been established.
1.3. Configure the Switches
Configuration switches for the SDSL ports are on the back of the SPEED-DSL 4.6,
numbered from left to right, 1-4.
SDSL 2
Power Adapter
Configuration
SDSL 2
Power Adapter
Configuration
Ethernet Connection
5V DC
SDSL 1
SDSL 2
SPEED-DSL 4.6
SDSL 1
SDSL Connection
SDSL Connection
Power
Collision
Rx
Tx
Lnk
Ethernet Connection
