© Pan Acoustics GmbH
Page 11 of 16
Manual
Doc. No
.: 2022_01608.V1 - 03.05.2022
16. Technical data loudspeaker
16.1. Pan EVAC P 04-EN54
ELECTRICAL PROPERTIES
Impedance*:
@ 100% : 133 Ω
@ 50% : 266 Ω
@ 25% : 532 Ω
@ 12.5%: 1013 Ω
Rated noise power:
75 W
rms
Rated noise voltage:
100 V
rms
Switch:
Power selector switch (100%, 50%, 25%, 12.5%)
Switchable high-pass filter
Fuses:
Lead fuse (1.0 A, time-lag type, replaceable)
Thermal fuse (trigger temperature 104 °C, 16 A, 250 V
AC
,
one-shot operation, replaceable)
Connections:
Connecting terminal (ceramic) (2-pin)
Cable diameter: (0.5 ... 2.5) mm
2
Cable gland: Ø (4.5 ... 10) mm
ACOUSTIC PROPERTIES
Configuration:
Passive line array
Drivers:
4 x 3.5”
Rated power:
75.0 W, 37.5 W, 18.8 W, 9.8 W (switchable)
Recommended amplifier:
Sufficiently dimensioned DSP power amplifier
Maximum SPL 100 V*:
96.3 dB
SPL
@ 4 m
Sensitivity (1 W/4 m)*:
81.6 dB
SPL
Frequency range:
190 Hz - 15 kHz (-10 dB, +6 dB, HPF off)
Horizontal radiation pattern*:
@ 500 Hz: 360°
@ 1000 Hz: 215°
@ 2000 Hz: 145°
@ 4000 Hz: 98°
Vertical radiation pattern*:
@ 500 Hz: 160°
@ 1000 Hz: 75°
@ 2000 Hz: 30°
@ 4000 Hz: 15°
Tilt angle**:
Vertical -4°
Range**:
15 m
MECHANICAL PROPERTIES
Pilot signal detection**:
Indicator: green LED behind protective grid
Frequency range: 20 kHz - 23 kHz
Required signal level (min): 6 V
rms
Enclosure:
Aluminium profile
Grille:
Powder-coated perforated metal sheet
Standard colours (with silver lids)***:
(optional: lids in enclosure colour)
Aluminium RAL 9006
White RAL 9010 (silk matt)
Black RAL 9005 (silk matt)
Operating temperature:
-25 °C to +70 °C ambient temperature
Dimensions (H x W x D):
506 x 107 x 136 [mm]
Weight:
3.6 kg
Certificates:
EN 54-24 Type B (outdoor)
IP 54**
Ball impact resistant**
Mounting:
Horizontally rotatable wall mount (TWM III)
* according to EN 54-24, HPF off
** not measured/tested in laboratory
*** special colours available on request
