© Pan Acoustics GmbH
V 1.0
Page 16 of 24
Manual
Step 3:
Fix the connection terminal to the loudspeaker.
Step 1:
Insert the stripped wires into pin 3 and pin 5 of
the connection terminal. To do this, open the
screw blocks with a screwdriver. After insert-
ing the wires, close the screw blocks again and
hand-tighten them with a torque of 10 Nm so
that the wires cannot slip out.
The wires of the connection cable must be
fi tted with wire end ferrules.
NOTICE
8.2.2.3. Power tapping 25%
