ID05449 - Rev. 0.1 - 01/12/2020
20
6.4 Handling the stretcher
WARNING! Always notify the patient before moving the stretcher.
WARNING! Movement must only take place on rigid flat surfaces and with the rails
raised. Always lock the stretcher at the end of handling.
WARNING! Make sure before moving the stretcher that the power cable is
disconnected from the mains socket and that it is rewound so that it does not
obstruct movement.
To move the stretcher proceed as follows:
▪
release the brakes;
▪
make sure that the sides are raised;
▪
push or pull the stretcher by gripping it by the push handles;
▪
at the end of the journey, lock the stretcher.
6.5 Raise and lower the stretcher
WARNING! Always notify the patient before adjusting the height of the stretcher.
Height adjustment of the stretcher is obtained by means of two electric actuators controlled via
the push-button panel and the control console.
To
adjust the height
of the stretcher proceed as follows:
▪
press the power button
F
and keep it pressed until the lights come on;
▪
press button
A
to
raise
the stretcher;
▪
press button
B
to
lower
the stretcher.
A
B