PNG125 will return to standby mode if no device is paired or
connected within 2 minutes of activating pairing mode on the
PNG125.
8
Reconnecting
When PNG125 is disconnected due to being out of range or
switched off, just click the MFB once and it will be reconnected to
the paired device (some models may require authorisation to
connect to the PNG125 simply press OK or accept).
Your PNG125 has been designed to switch off if no device is
connected after 15 minutes of being switched on, this function will
prevent the battery being discharged whilst not in use.
On standby mode blue LED light will flash every 3 seconds.
