7
Pairing
Prior to using the PNG125 for the first time, you must pair it with a
Bluetooth-enabled device. The steps below describe the pairing
procedure for a typical Bluetooth-enabled mobile phone.
1) Place the PNG125 and mobile phone no more than 1
metre apart.
2) Ensure the PNG125 is in the OFF mode.
3)
Press and hold the “MFB” button for 5 seconds until the
LED lights flashes red and blue alternately.
4) Activate the Bluetooth function on your mobile phone and
search for accessible Bluetooth devices, referring to your
mobile phone user guide for details if required.
5)
Select “Plug N Go 125” from the list.
6) Enter the pairing
code “0000” and press “OK” to pair the
PNG125 and the mobile phone. When pairing is completed,
the blue and red LED light will stop flashing, the PNG125 is
in the standby mode with the blue LED light flashing every
3 seconds.
7) Select connect on your mobile phone or if prompted to
connect please select OK.
