Connections
(continued)
10
Connect a VCR
SCART Cable
21
-pin
SCART
connector
VCR
How to connect:
Connect the SCART Cable between the unit and the VCR.
To play VCR
1. Turn on your LCD TV, press
SOURCE
button on the remote
control.
2. Push
ENTER
(Up/Down) to select
Scart2 AV
and press
ENTER
to
confirm.
3. Turn on your VCR, insert a videotape and press the Play button.
Note:
The unit receives
CVBS (VIDEO)
signal and
Y/C (S-VIDEO)
signal from
SCART2
interface.
When receiving
Y/C
signal, you need to select
Scart 2 Y/C
instead of
Scart 2 AV
in the source select menu.
Therefore, if you find that the colour is not properly displayed, please try to select
Scart 2 Y/C
.
To connect to external devices with AV terminals, you may use 2 I-pin Scart Converter to connect to SCART
interface on the unit, then please select
Scart 2 AV
and the unit receives
CVBS (VIDEO)
signal only.
Select Main Source
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. HDMI
Rear of the VCR
