DVD Playback Operation
24
Preparation:
After connections, turn on the unit and select the relevant video input before playback.
Disc Loading Steps:
1.
2.
3.
4.
Press the POWER button to turn on the power. Press the SOURCE button and select DVD,
press the ENTER button to confirm and shift to DVD mode.
Handing the disc with its printed side outward vertically to the disc tray. (Referring to the
below picture.)
Slightly put the disc into the disc tray.
As disc is automatically taken in the disc tray fully, the player will search a disc and play it
automatically in DVD mode.
Warning:
Do not play poor quality discs that may damage the player's lens.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don't match, the disc cannot be played. This player's default code is region 4.
Play
Press the PLAY button to start playback. Press the STOP button once on the remote control to stop
playback, and press the PLAY button again to resume playback.
Stop
Press the STOP button once to stop playback and press the PLAY button to resume normal
playback. Press this button twice repeatedly to stop playback completely.
