- 11 -
System Connections
Connecting to External AV Signal Source
Use the AV cables to connect the external AV signal source to the AV input jacks on the rear panel
of the unit. Use an S-VIDEO cable (not supplied) to connect the external AV signal source to the
S-VIDEO input jack on the rear panel of the unit.
After connection, turn on the power of the unit and the external AV signal source and then press the
SOURCE button to select COMPOSITE or S-VIDEO mode.
Note: The L/R audio input jacks can be used in both COMPOSITE and S-VIDEO modes.
Connecting to External AV Signal Source (YPbPr)
Use red, green and blue component video cables and red and white audio cables to connect the
external AV signal source to the Y/Pb/Pr input Jacks on the rear panel of the unit.
After connection, turn on the power of the unit and external AV signal source and then press the
SOURCE button to select COMPONENT mode.
N.B. Ensure the AV signal source is also switched to component video mode.
Summary of Contents for TFTV1525D
Page 1: ......
