Memorising the Channels
19
Your PDP TV can memorise and store all of the available channels. After the available channels are memorised,
use
CH
to scan through the available stations.
Storing Channels in Memory Automatically
Press
MENU
to display the menu main page.
Press
VOL+/-
repeatedly to display
options
menu page.
Press
CH
to select
tv tuner
item.
Press
VOL+
or
ENTER
to access the submenu.
If the
search
menu does not appear on the screen, press
VOL+/-
to select
search
menu page
Press
CH
twice to select
autoset
item.
Press
ENTER
to store channels in memory automatically.
The unit will begin memorising all of the available channels.
Note:
The process of auto memory will be stopped if you press the
MENU
button. After the process of auto memory, the
auto fine tune
item will
be set to
on
automatically.
Before you start auto channel memory, please refer to
[Setting colour
and Sound System]
on page 25 to select a proper sound system according
to your area.
Manual Search
Use
Manual Search
if desired channels cannot be memorised or if you would like to store channels to specific
channel numbers one by one.
Press
CH
repeatedly to select
manual search
item.
Press
VOL+/-
to start manual search.
Repeat steps 1~4 in
[Storing Channels in Memory
Automatically]
to display
search
menu page.
Pressing
VOL+
, the set searches towards higher frequency;
Pressing
VOL-
, the set searches towards lower frequency;
The search stops when a program is found and this program will
be stored in current channel.
4
3
2
1
5
6
3
2
1
options
select to activate tuner menu
tv tuner
select to activate manual search
<select> to enable
<select> to enable
40
off
on
off
manual search
channel skip
fine tune
auto fine tune
autoset
search
50
select to activate autoset
on
on
off
<select> to enable
<select> to enable
manual search
channel skip
fine tune
auto fine tune
autoset
search
off
50
channel searching
please wait or
press menu to cancel
12
