background image

 

Electrical  Connection 

 

 

Warning 

Improper use of the grounded plug can result in the risk of electrical shock.  If the power cord is 
damaged, have it replaced by an authorized service center or licensed electrician.

 

 

 

This freezer should  be properly grounded  for your safety.  The power cord of this freezer  is equipped 
with a three-prong  plug which mates with standard three prong wall outlets to minimize the  possibility 
of electrical shock. 

 

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. 

This freezer requires a standard 220/240Volt-50Hz electrical outlet with three-prong ground. 

The cord should be secured  behind the freezer and not left exposed or dangling to prevent accidental 
injury. 

 

Never unplug the freezer  by pulling the  power cord.  Always  grip the  plug firmly  and pull straight out 

from the receptacle. 

 

Do  not  use  an  extension  cord  with  this  appliance.  If the  power  cord  is too  short,  have  a  licensed 

electrician install an outlet near the appliance. 

 

The  "Green·  light  indicates  that  the freezer  is  properly  connected  to  the  electrical  power.  The  light 
indicates  power supply,  and  will  glow  even  if the  temperature  control  dial  is turned  to  ·oFF·, or the 
compressor has failed to work and the compartment  is not being cooled. 

 

The "Compressor  on· light indicates that the compressor  is on and running.  The compressor should 
not, under normal conditions, be running continuously unless the unit is in "Fast Freeze" mode. 

 

 
 

OPERATING YOUR FREEZER 

 

Temperature  Control 
•  Your freezer has one control for regulating the temperature. The temperature control is located on 

the lower right hand corner. 

•  The first time you turn the unit on, switch on the  Fast  Freeze switch  (amber light) and run for at 

least 2 hours before putting frozen foods inside.  This will ensure the cabinet  is thoroughly  chilled 
before food  is put in. 

•  Tum off the Fast Freeze switch. 
•  The range of the temperature control is from position" OFF", ·1·the warmest to •5" the coldest. 

Adjust the temperature control to the setting that best suits your needs. The setting of 

"3. 

should 

be appropriate for home or office freezer use. 

•  To tum the freezer off, tum the power switch to "OFF•. 

 

 

NOTE: 

•  Turning the temperature  control to  ·OFF " position stops the  cooling  cycle but does  not shut off 

the power to the freezer. 

•  If the unit is unplugged, lost power, or turned  off; you  must wait 3 to 5 minutes before restarting 

the unit. If you attempt to restart before this time delay, the freezer will not start. 

•  Large amounts of food will lower the cooling efficiency of the appliance. 
•  If  you  choose 

to 

change  the  thermostat  setting,  adjust  thermostat  control  by  one  numerical 

increment at a time.  Allow several hours for temperature to stabilize between adjustments. 

The Fast Freeze Switch (Amber) 

•  The light glows while the Fast Freeze switch is in the 'ON' position. 

Summary of Contents for PAL142CHF










Reviews: