background image

To connect MONITOR output terminal

To connect AV input terminal (continued)

CONNECTING OTHER EQUIPMENT

To select the video input, press 

TV/AV

 the button on the TV set or 

AV

 button on the remote

controller repeatedly until you see the corresponding input indication on the screen. To return to
aerial input, press the AV button until it displays program number, or press channel select button
or the CH          button.

If the colour of video input is abnormal, the colour system setting may be incorrect. Press the SYS
button until the COLOR AUTO is displayed on the screen. If the picture is still abnormal,
press the       or       button until normal colour appears.

NOTE on the S-VIDEO terminal

The 

S-VIDEO

 input terminal has priority over Video 1 VIDEO terminal. If 

S-VIDEO

 input

terminal is used, the screen will display 

"S-VIDEO1"

 Note that 

S-VIDEO

 input terminal and

the Video 1 VIDEO terminal can not be used at the same time, otherwise it will cause disorder
picture.

You can connect a stereo system to the 

MONITOR

  output terminals (photo type) on the set to

enjoy a high-quality sound from the stereo system. The 

MONITOR

 output terminals output the

video and audio signals being displayed on the screen.

16

TV

VIDEO 1

VIDEO 2

(S-VIDEO)

Summary of Contents for MODEL 5110PF





















Reviews: