26
Using the MENU System
4. System Setup
From here you can setup Time Zone, Auto power off, Factory Reset and check up the HD-
STB's system information.
Time Zone
From here you can setup the Time Zone. You should select the time zone information
after factory Reset. It is for correct time display when EPG information is displayed.
1) Press MENU to display the menu.
2) Press DOWN to select the System Setup menu.
3) Press OK or RIGHT to select System Setup menu.
4) Press OK or RIGHT to enter sub menu.
5) Press UP or DOWN to select Time Zone.
6) Press OK or RIGHT to change Time Zone where you live.
7) Press MENU to go back.
Auto Power Off
This HD-STB has Auto Power Off - Power Saver function. If you setup the Auto Power
Off - Power Saver with period of times, then this HD-STB will automatically turn off
after preset period of time in case of none remote control activity for prevent
unwanted operation. Prior to turn off, a pop-up menu will warns of impending HD-
STB power down. If you setup to Off, then this function will disable.
System Setup
Time Zone
Auto Power Off
Factory Reset
System Information
TV Remote Control Code List
NSW/ACT
VIC
QLD
SA
WA
TAS
NT
Select your time zone.
System Setup
Time Zone
Auto Power Off
Factory Reset
System Information
TV Remote Control Code List
NSW/ACT
Off
After 3 Hours
After 4 Hours
After 5 Hours
After 6 Hours
Automatically power off STB after selected present
period of no remote control activity. Prior to power off,
a pop-up message warns of impending STB power off.
