19
Using the MENU System
1) Press MENU to display the menu.
2) Press OK or RIGHT to select the User Preference menu.
3) Press RIGHT to select sub-menu.
4) Press UP or DOWN to select desired audio mode.
5) Press OK or RIGHT to save the selected audio mode.
6) Press MENU to exit the menu.
From here you can adjust whole setting and function of HD-STB.
If you press the MENU button, the menu screen will display.
You can move up and down using UP or DOWN button in the menu system. Press OK or RIGHT
button to select the items. MENU button will go back to one step back.
If there is no remote control activity more than 60 sec, then all menu will automatically
disappear for prevent unwanted operation.
1. User Preference
From here you can adjust User Preference settings concerning your TV.
Preferred Audio Type (I-II)
You can select desired audio signal from broadcaster. If you select Dolby Digital
and broadcaster simultaneous broadcast the Dolby Digital and MPEG audio, then
your HD-STB will check up the Dolby Digital audio first and decode Dolby Digital
audio.
If you select Dolby Digital but broadcaster broadcast MPEG audio only, then your
HD-STB will check up the Dolby Digital audio first and next select MPEG audio
automatically.
Also you can set up Audio Preference (I-II) with I-II button on the remote control.
But this change is affected to selected channel only If you change channel or turn
off the HD-STB, then default audio type be selected.
User Preference
Preferred Audio Type
SD Output Aspect Ratio
i-Plate Banner Duration
Front Panel LED Dimmer
Power Restore
Preferred audio type when program contains MPEG and
Dolby Digital audio
MPEG
Dolby Digita
l
10 sec
High
Disable
