10
Connecting up your player with RF lead
(Option 1) - How to connect with RF lead
Before you start, unplug all the equipment from the mains supply.
Aerial
The type of aerial you should use,
depends on local interference and
how far you are from the
transmitter. You should contact a
local retailer if you have any
questions about your aerial.
In option (1) you need to tune your television to the player so you can see the picture from the player. When
it is on the player generates a signal on UHF transmission channel 36, but this might change after tuning in
the stations with 'AUTO-SEARCH' . See the 'Check it out' box on page 16. See your television manual for
how to tune in a new channel.
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF DVD-VIDEO
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
REAR PANEL OF TV
RF CABLE
1
Remove circular cable (RF cable) (surplus cable) plugged in "ANT.IN" jack in rear panel of TV.
Connect the cable to
"ANT"
jack in rear panel of DVD-Video.
2
Connect TV to DVD-Video. Connect
"TV"
jack in DVD-Video with
"ANT.IN"
jack in TV with RF
cable.
