background image

6                  5

4.3.3 PREVIOUS BUTTON

Pressing this button to select the channel that was tuned immediately before the one being

watched. For example: If you are watching the program on channel 6, and the previous

previous programme you watched was was on channel 15; then you can press the button

to reach channel 15, press it again to return channel 6. 

4.4 SOUND CONTROL

4.4.1 VOLUME CONTROL

4.4.1.1 Press the VOL     button to increase volume; the green bar on the screen moves right.

4.4.1.2 Press the VOL      button to decrease volume; the green bar on the screen moves left.

4.4.2 MUTE BUTTON

         When there is a phone call or a visitor, it can temporarily shut off the sound without affecting

         the picture.

         To resume normal, press the MUTE or VOLUME (         ) button. The previous volume will

         be displayed for 4 seconds.

4.5 PICTURE CONTROL

4.5.1 Press the PICTURE CONTROL button on the Remote Control Unit.
         The FUNCTION to be adjusted is selected in sequence as shown in the following chart at
         every press of the button.

4.5.2  Adjust the           button to obtain satisfactory picture.

8

VOLUME

VOLUME

CONTRAST 

BRIGHTNESS 

COLOUR

ON SCREEN

DISPLAY

Press     button 

Press      button 

Colour

COLOUR

Pale

Deep

Brightness

BRIGHTNESS

Dark

Light

FUNCTION

Contrast

CONTRAST

CAPTION

DISPLAY

Weak

Strong

Green Bar Moves

MUTE

PRESS
AGAIN

llllllllll.....

l..............

Summary of Contents for 3499




















Reviews: