9
5. Do not use the appliance with the air vents covered or
on a soft surface such as a bed or sofa, as the air vents
could be blocked. Keep the air vents (if it has them) free
from hair, fluff or similar elements.
6. Do not insert any object into the appliance openings.
7. Do not use the appliance with aerosol products, outdoor
or in places where oxygen is administered.
8. Always connect the plug to the appliance. To disconnect
the appliance, put all the controls at “O” and unplug it
from the mains.
9. The battery may become discharged. Charge the shaver
before using for the first time or if not used for a long
period of time. To do this, turn it on. The internal blade
may optionally not function or turn.
10. Do not turn it on or charge it if it is near a heat source or
exposed to direct sunlight.
11. If the power cable is damaged, it must be replaced by
the manufacturer, its authorised technical service or by a
qualified technician, to prevent risks.
12. While charging, press the switch, otherwise the appliance
will not be charged.
Charging
1. Remove the power adapter, insert the plug of the end into the shaver end interface
and insert the other end into the power socket. The display light will go on and the
shaver will start to be charged.
2. Remove the power adapter when the shaver is fully charged. The charging process
has been completed. While charging, the blue LCD display shows different numbers.
The shaver is fully charged within a period of 1-2 hours. When fully charged, the word
“Full” will appear on the LCD screen. Unplug the adapter.
use
1. Pick up the appliance and remove the protective shield.
2. Press the switch to start up the electric shaver.
3. Remove the switch from the shaver switch to take out the clipper from the body for
trimming long moustaches and hair.
