This product is suitable for EcoGrow / Hobby / Grand & Prestige
greenhouse series.
•
The kit can be assembled in either of the depicted options.
Step 1:
Relevant to EcoGrow & Hobby greenhouse series – it is important
to push the panel from the sides and make sure it isn’t folded or bent, you
will need it late.
Mark the UV protected side and make sure it is facing out.
Part # 8694 is redundant in the EcoGrow & Hobby.
Steps 2 & 5:
All panels with the stamped words THIS SIDE OUT must be
facing out to create full UV protection. Remove plastic sticker as panels are
locked in place.
Tighten all screws when completing assembly.
Periodically check the kit components to assure that it remains stable.
When encountering the information icon, please refer to the relevant
assembly step for additional comments and assistance.
This icon indicates that the installer should be inside the greenhouse.
Please read these instructions carefully before you start to
assemble this product.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
Safety
Some parts may have sharp edges. Please be careful when handling
components.
Always wear gloves, eye protection, and long sleeves when assembling
or performing any maintenance on your product.
To prevent injuries, do not allow children to play under the greenhouse
during assembly.
It is highly recommended to be assisted by a second person in some steps.
Sort the parts and check according to the contents parts list.
In case you bought the window kit along with the greenhouse, please install the
kit along with the assembly of the greenhouse and not after the greenhouse was
assembled.
EN
Before Assembly
83418_L_17.04_V1_MV
-4
