(a)
(b)
(b)
M601
M601
M606
M606
M601
M601
M603
(c)
(c)
click
(d)
M603
M604
M29
1
2
M604
The short profiles M604 are to be used in the continuing assembly for
interconnecting all the rest base profiles (c).
When performing this next connections step , verify that the small
protruding convex metal in profile M604, engages the bore corresponnding
on all other base profiles - listen to hear the "click" (c) sound.
Assembling the Base
Start assembling the base of the greenhousewith the following preparatory
step:
Observe the recess cut at the width of profile M601. Along this position,
bend the profile M601 to form a right angle (a).
NOTE - you must wear protective gloves for performing this operation.
ATTENTION - note that the small tab cut in the lower side of the profile
has to remain inside the angle being formed.
When inserting screw M29 to fasten the formed angle (b), be sure to
have this tab flush with the inside flat lower surface of the profile.
Proceed to similarly bend , the other one supplied M601
profile and two profiles M606.
M601
M29
M29
