16
TIMER OVER-RIDE FUNCTION
The
OVERRIDE
function allows the user to manually over-ride the preset timer program to operate the
heater
[Press OVER-RIDE button]
If a timer(s) is selected and the heater is operating within a timer programmed ‘time period’ or ‘pre-heat
period’ (burner on), the timer may be over-ridden and the burner turned off by pressing and releasing the
OVERIDE
button once. The
OVERIDE
LED will illuminate, the timer LED’s will stop flashing and the
ON/OFF
LED will change from red to green after the heater has turned off.
If the
OVERIDE
button is pressed and released once again, the
OVERIRDE
LED will extinguish and the unit
will operate provided the current time is within the programmed ‘on period’ of the selected timer including
pre-heat period.
If a timer(s) is selected and the heater is operating outside a timer programmed time period (burner off), the
timer may be over-ridden and the heater turned on by pressing and releasing the
OVERRIDE
button once.
The
OVERIRDE
LED will illuminate; the timers LED’s will remain on and the unit will operate.
If the
OVERIRDE
button is pushed and released once again, the
OVERRIDE
LED will extinguish and the
heater will turn off provided the current time is not within the ‘on period’ of the selected timer including pre-
heat time.
REMOTE CONTROL OPERATION
The remote controller cannot be used for any programming however it can be used to turn the appliance
ON
and/or
OFF
provided the
ON/OFF
button on the heater control panel has been turned
ON
first. The remote
controller can be used to adjust set point up or down or activate or de-activate
TIMER 1
and/or
TIMER 2
.
Operation of the timer override function can also be performed or cancelled.
ON
BUTTON
TEMPADJUSTMENT
BUTTON
TIMER1
BUTTON
OVER
‐
RIDE
BUTTON
OFF
BUTTON
TIMER
2
BUTTON
ON
OFF
DOWN
UP
1
TIMER
2
OVERRIDE
