12
CALDERA E CORTEN FIRE PIT | Owner and Installation Manual
CLEANING AND MAINTENANCE
WARNING: Turn off gas before servicing fire pit. It is recommended that
a qualified service technician perform these check-ups at the beginning
of each fire pit season.
If any irregularities are apparent with operation. Please refer to Troubleshooting
guide, pages 11-12.
BURNER ELEMENT AND PILOT
Keep the burner and pilot area clean by vacuuming or brushing at least twice a year.
Make sure the burner porting and burner air openings are free of obstructions at all
times.
Inspect area around the burner. Remove any lint or foreign material with a brush or
vacuum cleaner.
If it evident that the burner is damaged, the burner must be replaced prior to the
appliance being put into operation.
PILOT FLAME
The flames from the pilot should be
visually checked as soon as the unit
is installed, and periodically during
normal operation. The pilot flame
must always be present when the
fireplace is in operation or connected
to the gas line with the main shutoff
valve open and the IPS activated
(powered). The pilot flame has two
distinct flames: one engulfing the
flame sensor, and the other reaching
to the main burner.
Burner Element
Pilot Assembly
