PA-400 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | Install the PA-400 Series Firewall
35
©
2021 Palo Alto Networks, Inc.
STEP 5 |
While holding the firewall, carefully flip the mounting tray over to reveal its underside.
STEP 6 |
Secure the firewall in place using three of the provided #6-32 x 3/16” Long Flathead screws.
STEP 7 |
(
If mounting a second firewall
) Repeat Steps 4 through 6 for the second firewall. Place the second
firewall adjacent to the first firewall in the mounting tray.
STEP 8 |
Flip the mounting tray back into an upright position.
STEP 9 |
Slide the firewall power supply into the marked position. Fasten the provided velcro strap
around the power supply until it is secure in place.
Summary of Contents for PA-400 Series
Page 1: ...PA 400 Series Next Gen Firewall Hardware Reference paloaltonetworks com documentation...
Page 4: ...iv TABLE OF CONTENTS...
Page 14: ...14 PA 400 SERIES NEXT GEN FIREWALL HARDWARE REFERENCE Before You Begin...
Page 40: ...40 PA 400 SERIES NEXT GEN FIREWALL HARDWARE REFERENCE Install the PA 400 Series Firewall...
