Palo Alto Networks
Install the Hardware •
11
March 17, 2015 - Palo Alto Networks COMPANY CONFIDENTIAL
Chapter 2
Install the Hardware
This chapter describes how to install the PA-3000 Series firewalls.
•
“Tamper Proof Statement” on page 11
•
“Before You Begin” on page 11
•
“Equipment Rack Installation” on page 13
•
“Connect Cables to the Device” on page 15
•
“Connect Power” on page 16
Tamper Proof Statement
To ensure that products purchased from Palo Alto Networks have not been tampered with
during shipping, verify the following upon receipt of each product:
•
The tracking number provided to you electronically when ordering the product matches
the tracking number that is physically labelled on the box or crate.
•
The integrity of the tamper-proof tape used to seal the box or crate has not been
compromised.
•
The warranty seals on the device itself do not show evidence of tampering.
Before You Begin
•
It is recommended that two people be available to mount the PA-3000 Series firewall in a
19-inch rack.
•
Have a Phillips-head screwdriver available.
•
Verify that the intended location has adequate air circulation and meets the temperature
requirements. Refer to the “Environmental Specifications” on page 24.
•
Unpack the device.
