PAGE | 2
Make sure your software and firmware are up-to-date. You can update PSTrace for Windows via
the menu
Help
→
Check for updates.
The firmware of your instrument is updated automatically
in PSTrace upon connecting to the EmStat4M Development Board, if needed. In case of
questions, please do not hesitate to contact us at
. Try to describe the
problem as detailed as possible, photos and screenshots are often very helpful.
BT
Bluetooth
EEPROM Electrically Erasable Programmable Read-Only Memory
ES4M
EmStat4M
GPIO
General Purpose Input Output (pin)
IC
Integrated Circuit
PCB
Printed Circuit Board
RTC
Real-Time Clock
SDK
Software Development Kit
UART
Universal Asynchronous Receiver Transmitter
USB
Universal Serial Bus
The EmStat4M Development Board is intended as development, demonstration and testing
platform for electrochemical applications using the EmStat4M module.
The EmStat4M is a module (small PCB) of 62 x 40 mm functioning as Potentiostat,
Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance
Spectroscopy (EIS).
The development board can be powered and communicate directly via its USB-C port, or it can
be connected using the pin headers for communication, power, and cell connections.
A high-end LEMO connector for use with our standard shielded sensor cables is available on
the EmStat4M module. It is always advised to use the LEMO connector for best performance.
The box you received contains the following items:
▪
EmStat4M LR or HR module
▪
Development Board
▪
Micro-USB cable
▪
USB-C cable
▪
USB splitter cable for extra power (EmStat4M HR only)
▪
Sensor cable (1 meter with 2 mm pins)
▪
4 croc clips (EmStat4M LR) or 5 croc clips (EmStat4M HR)
▪
2x SPE connector
▪
Mini screwdriver
▪
Dummy Cell
