Palmgren CS 250, Operating Manual, Page: 45 / 49

Appendix
Page 44
8 Appendix
8.1 Copyright
”
2010
This document is copyright. All derived rights are also reserved, especially those of translation,
re-impression, use of figures, broadcast, reproduction by photo-mechanical or similar means
and recording in data processing systems, whether partial or total.
The company reserves the right to make technical alterations without prior notice.
8.2 Terminology/ Glossary
TERM EXPLANATION
Work piece • Piece to be milled, drilled or machined.
Material stop • Position for several sawings
• Sawing stop
Protective cover of
saw blade • Casing on the saw blade
Clamping jaws • Clamping rail of the machine vice
Quick-action vice • Clamping device for the workpiece
Drive motor • Sawing motor
High-strength cable
gland • Strain relief of the electrical connection