Palmgren CS 250, Operating Manual

Page: 34 / 49

Maintenance
Page 34
as required
Vi
c
e
Cl
ean
ing the vice
«
Regularly remove the chips which are accumulating below
the clamping jaws.
« To do so, use a thin, flat brush.
CAUTION!
Never clean the vice with compressed air.
as required
Arbo
r be
aring
b
lock
Lubri
ca
te
• Lubricate the arbor of the bearing block
Illustration: 5-3: Bearing block
as required
Machine vice
Sp
in
d
le
• Lubricate the spindle of the machine vice at the provided lubricat-
ing nipples.
•
Type of lubricating oil,
“Operating material“ on page 16
as required
bea
ri
ng bock saw hea
d
adjust-
ing the
end
position
The end position of the saw blade shall be positioned below
the support face of the machine vice.
« Adjust the end position of the saw head with the screw.
Refasten the counternut after readjusting it.
Illustr.5-4: end position saw arch
INTERVAL WHERE? WHAT? HOW?
Lubricating nipple
Arbor
Bearing block
Mechanical end posi-
tion of the saw arch
adjusting screw