Version 1.1.4 dated 2015-3-30
Page 48
Original operating instructions
BF46 Vario | BF46TC
US
First after 200
operatingm
hours, then
every 2000
operating hours
Gear mi
lli
ng
h
e
ad
Oil change
For oil change use an appropriate collecting tray of suffi-
cient capacity.
Have the mill drill run for a few minutes, the oil will heat up
and will slightly penetrate from the opening.
Remove the ventilation screw from the gear.
Remove the oil drain plug.
Refill the oil over the removed ventilation screw.
Quantity and type of oil
"Operating material“ on page 18
Fig.5-3: Milling head
Interval
Where?
What?
How?
Oil drain plug
Ventilation screw of the gear