Version 1.1.4 dated 2015-3-30
Page 26
Original operating instructions
BF46 Vario | BF46TC
US
3.8.3 Filling in gear oil
The mill drill is delivered without oil filling. Fill in gear lubricant
oil into the drill-mill head and the central lubrication unit.
"Oil change“ on page 48
3.8.4 Warming up the machine
ATTENTION!
If the mill drill and in particular the milling spindle is immediately operated at maximum
load when it is cold it may result in damages.
If the machine is cold such as e.g. directly after having transported the machine it should be
warmed up at a spindle speed of only 500 rpm for the first 30 minutes.
3.8.5 Compressed air supply on BF46TC
Connect the compressed air supply
with at least 87 psi (6 bars) to the
quick-action coupling of the com-
pressed air maintenance unit.
ATTENTION!
In order to ensure a failure-free
operation of the machine it is
necessary that the required air
pressure is continuously applied on
the machine at constant quality.
Fig.3-1:
Compressed air supply
Compressed air
service unit
