2
Palmgren Operating Manual & Parts List 9681109 & 9681108
DESCRIPTION
Palmgren Model 9681109 6” x 10” Belt Disc Sander with stand and
Model 9681108 6” x 14” Belt Disc Sander with cabinet are con-
structed of rugged cast iron and heavy gauge steel providing sta-
bility and vibration-free operation. The belt disc sanders are used to
sand, deburr, bevel and grind large workpieces of wood, plastic and
metal.
The belt housing can be pivoted from vertical to horizontal for
sanding large, straight workpieces. The belt assembly includes a tilt-
ing cast iron table that tilts out 45º, miter gauge and 4” dust collec-
tion chute.
The 10” or 14” disc can be used to sand or bevel surfaces with the
use of a cast iron table that tilts out 45º and in 20º, miter gauge slot
and 4” dust collection chute.
The 3” diameter idler drum permits the sanding of contoured
shapes and finishes by positioning the adjustable platen from a
horizontal to vertical position.
The collection chutes accept the standard 4” dust collection hose
for quick removal of dust. The adjustable miter gauge can be used
on both the belt and disc tables for guiding the workpiece at a de-
sired angle while sanding.
UNPACKING
Refer to Figure 1.
Check for shipping damage. If damage has occurred, a claim must
be filed with carrier. Check for completeness. Immediately report
missing parts to dealer.
The sander comes assembled as one unit. Additional parts which
need to be fastened to sander, should be located and accounted
for before assembling.
A Abrasive Disc 100X
C Miter Gauge Assembly
D Workstop
F Intake Port Cap
• Parts Bag
Parts bag includes: one 8mm flat washer, four foot rest assemblies,
6mm hex wrench and 4mm long hex wrench.
SPECIFICATIONS
9681109, 6"x10" 9681108, 6"x14"
Belt Platen Area (W x L) 6-3/4" x 14-1/2" 6-3/4" x 14-1/2"
Belt Table Dim. (W x D) 8-5/8" x 6.0" 8-5/8" x 6.0"
Belt Table Tilts 45 degree 45 degree
Dust Chute Size 4" 4"
Belt Speed (SFPM-60 Hz) 2258 FPM 2258 FPM
Disc Diameter 10" (PSA) 14" (PSA)
Disc Table Dim (W x D) 11-1/4" x 7-1/4" 15-5/8" x 7-1/4"
Disc Table Tilt 45 degree 45 degree
Disc Speed (RPM) 1720 1720
Stand Dim (L x W x H) 24¾" x 19" x 21¼" N/A
Cabinet Dim (L x W x H) N/A 17½" x 20" x 28"
HP 1.0 HP 1.5 HP
Voltage 115/230 115/230
RPM 1720 1720
Phase 1 1
Amps 9.5/4.75 12.5/6.25
Assembled Wt. 141 lbs. 180 lbs.
Assembled Dim (L x W x H) 29.3"x18.3"x51.8" 30.7"x20"x51"
Shipping Weight 178.5 lbs. 236 lbs.
Shipping Dim (L x W x H) 30"x19"x34.8" 31.5"x22"x56.3"
SAFETY RULES
WARNING:
For your own safety, read all of the instructions and
precautions before operating tool.
CAUTION:
Always follow proper operating procedures as defined
in this manual even if you are familiar with use of this or similar
tools. Remember that being careless for even a fraction of a second
can result in severe personal injury.
WARNING:
Some dust created by power sanding, sawing, grind-
ing, drilling and other construction activities contains chemicals
known to the state of California to cause cancer, birth defects or
other reproductive harm.
Some examples of these chemicals are:
•
Lead from lead-based paints.
•
Crystalline silica from bricks and cement and other
masonry products.
•
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures vary, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area and work with approved safety
equipment. Always wear
OSHA/NIOSH
approved, properly fitting
face mask or respirator when using such tools.
BE PREPARED FOR JOB
•
Wear proper apparel. Do not wear loose clothing, gloves, neck-
ties, rings, bracelets or other jewelry which may get caught in
moving parts of machine.
•
Wear protective hair covering to contain long hair.
•
Wear safety shoes with non-slip soles.
•
Wear safety glasses complying with United States ANSI Z87.1.
Everyday glasses have only impact resistant lenses. They are
NOT
safety glasses.
•
Wear face mask or dust mask if operation is dusty.
•
Be alert and think clearly. Never operate power tools when tired,
intoxicated or when taking medications that cause drowsiness.
Figure 1 – Unpacking sander.
D
A
B
E
F
C
