9
USER MANUAL
PWT06IEC
8
1
CONNECTIONS AND OPERATING ELEMENTS
1. AC INPUT
IEC connection for the power supply of the unit. A suitable mains cable is included in the scope of delivery.
2. POWER
Rocker switch for switching the device on and off. The switch has an indicator light. This lights up as soon as the
unit is correctly connected to the power supply and switched on.
3. DC OUTPUT
Non-isolated 9 V DC output with up to 2000 mA output current for effects units with high current requirements and
external power supplies (e.g. PWT04) that do not require an isolated and filtered power supply.
4. USB
One USB-C and USB-A port each with up to 18 watts total power for charging smartphones, tablets and the like.
5. OUTPUT 1
Isolated DC output with potentiometer for a continuously adjustable output voltage from 6 V to 18 V and
up to 250 mA output current. Always set the required voltage BEFORE connecting the corresponding effect
device.
6. OUTPUT 2
DC output with 9 V output voltage and up to 500 mA output current.
7. OUTPUT 3 AND 4
Two isolated DC outputs switchable between 9 V and 12 V output voltage, each with up to 250 mA output
current.
8. SWITCH OUTPUT 3 AND 4
One voltage selector switch each for outputs 3 and 4. Position left = 9 V, position right = 12 V. Always set the
required voltage BEFORE connecting the corresponding effect device.
9. OUTPUT 5 AND 6
Two isolated DC outputs switchable between 9 V and 18 V output voltage, each with up to 250 mA output current.
EN
6
2
3
4
7
9
10
5
Universal 6-fold power supply
unit for the power supply
of effect devices
